Published July 13, 2026 at 01:10
A French winemaker in Bordeaux needs to document the sugar content of their grape must. In Sweden/Germany the Oechsle scale is used (I wrote about it for r-nu earlier). In English-speaking countries, Brix is used. In FRANCE and much of the wine world south of the Alps, the BAUMÉ scale is still used — invented by Antoine Baumé in 1768, long before Adolf Brix (1854) or Ferdinand Oechsle (1836).
For an international wine trader, this means LABELING and DOCUMENTATION vary between markets. A Bordeaux must at 13.5 °Bé, a German wine at 92 °Oechsle, and a Californian must at 24 °Brix ALL represent roughly the same sugar concentration (equivalent to ~13% ABV finished wine) — but are recorded in different units depending on tradition.
The Palm Abbe VINO3 is the refractometer that measures BOTH Baumé and sugar content (g/L) simultaneously, with a push-button calibration.
Antoine Baumé’s invention, 1768
Antoine Baumé (1728-1804) was a French pharmacist and chemist. In the 1760s he worked on industrial salt production and needed a way to measure solution concentrations objectively. Existing methods (weight comparison with water, drying analysis) were slow and impractical for production workflows.
He invented the HYDROMETER — a glass tube with a heavy ballast that floats in the liquid. The depth of immersion indicates the liquid’s density: heavier liquids make the hydrometer float higher.
His SCALE was elegantly simple:
- Pure water: 0 °Bé.
- Saturated NaCl solution (26% NaCl at 20 °C): 15 °Bé.
- Linear interpolation in between.
This 0-15 reference (pure water to saturated salt) was practical for the salt industry. But the scale also worked for other solutions — sugar, nitrogen salts, acids. It was enough to calibrate the SAME hydrometer against different known reference solutions.
Two different Baumé scales
Historically, TWO different Baumé scales were developed:
Baumé for liquids HEAVIER-than-water (Bé for solutions with density >1.000):
°Bé = 145 − (145 / SG)
At SG 1.050 → 6.90 °Bé. At SG 1.100 → 13.18 °Bé. At SG 1.200 → 24.17 °Bé.
Baumé for liquids LIGHTER-than-water (Bé for alcohol, oils):
°Bé = (140 / SG) − 130
At SG 0.900 → 25.55 °Bé. At SG 0.800 → 45.00 °Bé.
The two scales are NOT interchangeable — the same °Bé value means DIFFERENT density depending on which scale is used. For sugar solutions and other substances heavier than water, Heavy-Baumé is used.
Baumé-to-Brix conversion
Approximate conversion for sugar solutions (Heavy-Baumé):
- 1 °Bé ≈ 1.8% Brix.
- 5 °Bé ≈ 9% Brix.
- 10 °Bé ≈ 18% Brix.
- 15 °Bé ≈ 27% Brix.
- 20 °Bé ≈ 36% Brix.
- 30 °Bé ≈ 55% Brix.
- 40 °Bé ≈ 76% Brix.
The conversion is not perfectly linear — Baumé is based on density, Brix on weight percentage. For pure sugar solutions the correlation is good; for complex solutions (with acids, other dissolved substances) deviations can occur.
Who still uses Baumé
French wine industry: The standard unit for grape must measurement. Ministère de l’Agriculture registration uses Baumé.
French syrup and confectionery industry: Grenadine, honey, spirits.
Cosmetics manufacturing: Cream and lotion concentrations.
Salt and acid production: Baumé was invented for these. Still standard.
American sugar refining: Some long-established refineries use Baumé out of tradition.
Wine imports to the US from France: Must convert Baumé-labeled documents to Brix.
Historical recipes and older literature: Before 1900, Baumé dominated. Recipes from that period use Baumé.
Dual scale: Baumé + sugar content g/l
The Palm Abbe VINO3 shows both values simultaneously:
- Scale 1: °Baumé (Heavy scale).
- Scale 2: Sugar content in grams per liter (g/L).
Sugar content g/L is the QUANTITATIVE parameter (how much sugar in a volume of liquid). Baumé is the TRADITIONAL density-based parameter. Both are useful in different contexts.
Example: a typical French wine must at harvest has:
- Baumé: 12-14 °Bé.
- Sugar content: 210-250 g/L.
The winemaker documents both in the log — Baumé for the French-standard report, g/L for technical fermentation calculations.
French wine Baumé table
Typical Baumé values for French winegrowing:
- Below 10 °Bé: Significantly underripe grapes. The wine will be below 10% ABV. Not commercially interesting.
- 10-11 °Bé: Underripe. Suitable for sparkling wine (Champagne, Cava), which benefits from lower sugar + higher acidity.
- 11-13 °Bé: Standard ripeness. Dry wines with 11-13% ABV.
- 13-14 °Bé: Good ripeness. Wine with 13-14% ABV. Standard Bordeaux, Rioja.
- 14-16 °Bé: High ripeness. Wine with 14.5-16% ABV. Warmer-year Rhône, California Cabernet.
- Above 16 °Bé: Extreme ripeness. For dessert wine (Sauternes, port).
Palm Abbe VINO3 technical specifications
- Scale 1: Baumé 0-30 °Bé (Heavy scale).
- Scale 2: Sugar content 0-500 g/L.
- Automatic temperature compensation: 0-50 °C.
- Accuracy: ±0.1 °Bé, ±3 g/L.
- Resolution: 0.1 °Bé, 1 g/L.
- Sample volume: 2-3 drops.
- Measurement time: 3 seconds.
- Sapphire prism.
- Stainless steel well.
- 2 AAA batteries, ~3,000 measurements.
What you get for the money
Palm Abbe VINO3 digital refractometer for Baumé (Heavy scale) and sugar content (g/L), automatic temperature compensation, sapphire prism, stainless steel measuring well, IP65 protection, 2 AAA batteries. 5,524 SEK.
The standard instrument for French-tradition winegrowing, syrup production, salt production, and other industries where Baumé is still the documentation standard. For English- or German-speaking applications (where Brix or Oechsle dominate) this specific model is less relevant — choose the Brix or Oechsle variants instead. Historical recipe research or import operations across Baumé-standard countries justify this instrument.
Read more: Palm Abbe VINO3 Baumé refractometer in the shop →