Published July 15, 2026 at 20:46
Seawater is one of the most complex liquid solutions found in nature. In everyday usage, ”salt” is often treated as a synonym for the mineral content of seawater, but the reality is considerably more nuanced. Standard seawater (35 g/kg TDS) contains approximately:
- NaCl: 30.6 g/kg — dominant, but NOT the whole story.
- MgCl₂: 3.7 g/kg.
- MgSO₄: 2.3 g/kg.
- CaSO₄: 1.2 g/kg.
- K₂SO₄: 0.9 g/kg.
- CaCO₃: 0.1 g/kg.
- MgBr₂: 0.1 g/kg.
- Borates, iodides, fluorides: Trace elements.
A standard salt refractometer (such as the Extech RF20 described earlier) is calibrated ONLY FOR NaCl solution. When one is used on seawater:
- An NaCl refractometer reads approximately 32-33 ppt when the actual seawater salinity is 35 ppt.
- Error: 5-10% under-reading.
- With brackish water or varying mineral content: the error can be 10-20%.
For MARINE research, oceanography, aquarium management and the desalination industry, this is NOT precise enough. That is why UNESCO developed the ”Practical Salinity Scale”, and why the Palm Abbe AQUAR series exists.
UNESCO Practical Salinity Scale (PSS-78)
The scientific standard for seawater salinity is PSS-78, published in 1978 by UNESCO’s Intergovernmental Oceanographic Commission (IOC). The standard defines:
- Salinity as a DIMENSIONLESS number (not ”ppt” or ”g/kg”). Symbol: S.
- Calibrated against IAPSO Standard Seawater — a reference seawater from the North Atlantic with a defined composition.
- Salinity 35 = standard seawater. Salinity 0 = distilled water. Salinity 42 = the Red Sea.
- Calculated from CONDUCTIVITY measurements or other physical properties (such as refractive index).
PSU = Practical Salinity Units is the PRACTICAL unit used in marine science. The values are numerically identical to the old ”ppt” (parts per thousand) for seawater close to standard composition, but differ for liquids with a deviating composition.
This refractometer’s unique PSS-78 calibration
The Palm Abbe AQUAR PA-H50 does NOT use a generic NaCl table. Instead, its calibration is tailored to the composition of REAL SEAWATER according to PSS-78. Practical consequences:
- Reports salinity in the correct PSU unit.
- Gives accurate readings for seawater regardless of geographic location (North Atlantic, Mediterranean, Red Sea, Baltic Sea).
- Calibrated with ATC (automatic temperature compensation) according to PSS-78’s temperature correction formula.
For applications that do NOT involve seawater (e.g. brine in confectionery production), the instrument can still display ppt values, but PSU mode should NOT be used — as it is physically incorrect.
Applications
Oceanography and marine research: A standard tool for field measurements. Used on ships for surface measurements and shallow-water measurements.
Marine aquarium management: Professional marine aquariums (public aquariums, maritime museums) maintain a salinity of 33-35 PSU. A standard NaCl refractometer may read 31 PSU when the actual value is 34 — enough to stress the fish.
Desalination plants: Verification of intake seawater salinity and outlet product salinity. Osmotic pressure calculations require exact salinity.
Fish farming (marine): Salmon and sea fish farming require controlled salinity. Below-standard salinity stresses the fish; above-standard salinity inhibits growth.
Ship maintenance: Verification of ballast water salinity in accordance with international regulations (BWM Convention).
Science education: Marine biology and oceanography courses use it as a demonstration tool.
Environmental monitoring — estuaries: The salinity gradient between fresh water and salt water. PSS-78 handles the brackish range (5-30 PSU) correctly.
Rescue services — ocean simulators: Calibration of rescue training pools that imitate ocean properties.
Ship galleys: Seawater desalination systems that generate drinking water on board are verified for both intake and outlet salinity.
The difference between brackish water, seawater and hypersaline water
The refractometer covers the ENTIRE salinity spectrum, from fresh water to hypersaline water:
- Fresh water: 0-0.5 PSU. Lakes, rivers, drinking water.
- Brackish water: 0.5-30 PSU. Estuaries, the Baltic Sea (5-10 PSU in the central part), estuarine areas.
- Seawater: 30-40 PSU. Ocean standard 35 PSU.
- Red Sea, Mediterranean: 38-42 PSU. Higher evaporation.
- Hypersaline: >42 PSU. Salt lakes (Great Salt Lake, Utah: 100-150 PSU), evaporation ponds for salt extraction.
- Saturated NaCl solution: ~260 PSU (26%). Calibration limit at the physical saturation point.
The PA-H50’s measuring range covers this ENTIRE spectrum, including hypersaline, which is extended compared with a standard seawater refractometer (typically 0-45 PSU).
Titanium sample well for corrosion resistance
Seawater is VERY AGGRESSIVE toward metal — chloride ions in particular attack stainless steel, aluminum and brass. A standard refractometer with a stainless steel well shows visible corrosion after 6-12 months of seawater testing.
The PA-H50 has a TITANIUM sample well:
- Titanium’s passivation layer (TiO₂) is immune to seawater corrosion.
- Service life of 20-30+ years with no measurable corrosion.
- Approved for direct contact with seawater from all of the world’s oceans.
This justifies the higher price compared with a standard salinity refractometer with a steel well.
Automatic temperature compensation according to PSS-78
The refractive index of seawater varies with temperature according to PSS-78’s specific formula:
n_seawater(T, S) = n_pure_water(T) + k(S) × ²
The PA-H50’s ATC uses this specific formula — not the generic NaCl formula. This gives a correct salinity reading regardless of the water temperature (0-50 °C range).
For tropical seawater measurements (28-32 °C) and cold-water measurements (2-8 °C, Arctic Ocean), the same instrument works without recalibration.
Alternatives to a PSS-78 seawater refractometer
Conductivity meters (e.g. YSI ProDSS): SEK 20,000-80,000. The standard method in professional oceanography. Measures salinity indirectly via electrical conductivity + the PSS-78 formula. More accurate than a refractometer.
Chloride titration (lab method): Chemical analysis with silver nitrate. ±0.01 PSU precision. Requires lab equipment + chemicals + 30-60 minutes per sample.
Densitometer: Measures salinity indirectly via density. Precision ±0.01-0.1 PSU. Good for the lab, impractical for field measurements.
PA-H50 (this one): Portable refractometer, ±0.2 PSU precision, 3-second measurement, battery-powered, no lab equipment required. Perfect for field use and routine monitoring.
Standard NaCl refractometer (Extech RF20): SEK 500-2,000. Gives only an approximate seawater salinity, with a 5-15% error. Good for aquarium hobbyists, poor for professional oceanography.
Calibration standards
The PA-H50 is calibrated against IAPSO Standard Seawater (SSW) — the international reference seawater distributed from IAPSO’s office in the United Kingdom. A standard sample bottle (500 mL) costs ~SEK 500 and is used annually to verify the instrument’s calibration.
Alternative: distilled water for the 0 PSU reference + NaCl standard solution for the high-PSU point. Less accurate than IAPSO SSW but practically available.
Scale functions and display
- PSU mode: Direct PSU reading according to PSS-78.
- Conductivity emulation: Shows the equivalent conductivity (mS/cm) for comparison with YSI instruments.
- Chlorinity: The traditional oceanographic unit Cl‰. Formula: Cl = S/1.80655.
- Specific gravity (SG): Density relative to pure water at 20 °C.
- Freezing point scale: Seawater freezes between -1.8 °C (35 PSU) and 0 °C (0 PSU).
Specifications
- Model: MISCO Palm Abbe AQUAR PA-H50.
- Salinity scale: 0-260 PSU (PSS-78 calibrated).
- Precision: ±0.2 PSU for the seawater range (0-45 PSU).
- Resolution: 0.1 PSU.
- Automatic temperature compensation (ATC) 0-50 °C according to the PSS-78 formula.
- Sample well: TITANIUM (seawater corrosion-resistant).
- Display: LCD with backlight.
- Additional scales: conductivity, chlorinity, SG, freezing point.
- Battery-powered (V357 or equivalent).
- Measurement time: 3-5 seconds.
What you get for your money
MISCO Palm Abbe AQUAR PA-H50 seawater refractometer with PSS-78 calibration according to the UNESCO 1978 standard, measuring range 0-260 PSU (covers fresh, brackish, sea and hypersaline water), ±0.2 PSU precision, automatic temperature compensation 0-50 °C, TITANIUM sample well for seawater corrosion resistance, additional unit scales (conductivity, chlorinity, SG, freezing point), LCD display with backlight, 3-second measurement. SEK 6,555.
The standard tool for oceanographers, marine aquarium technicians, desalination plant operators, fish farming technicians, ship maintenance crews and environmental monitoring teams working with SEAWATER rather than general NaCl solutions. The higher price over a standard NaCl refractometer (~SEK 2,000) is justified when the measurement must account for the complex mineral composition of seawater — which it must for any scientifically reportable marine measurement.
Read more: Palm Abbe AQUAR PA-H50 in the shop →